BenQ MH684 User Manual page 53

FUNCTION
Picture Mode
Reference
Mode
Brightness
Contrast
Color
Tint
Sharpness
Brilliant Color
Color
Temperature
Color
Temperature
Fine Tuning
3D Color
Management
Reset picture
settings
Quick Auto
Search
Color Space
Conversion
Operation
DESCRIPTION
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
picture mode" on page 37
Selects a picture mode that most suits your need for the image
quality and further fine-tune the image based on the selections listed
on the same page below. See
page 38 for details.
Adjusts the brightness of the image. See
page 38 for details.
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 38
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 38
The function is only available when Video or S-Video with NTSC
system is selected.
Adjusts the red and green color tones of the image. See
Tint" on page 38 for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Adjusts the image to make it look sharper or softer. See
Sharpness" on page 38
The function is only available when Video or S-Video with NTSC
system is selected.
Adjusts white peaking while maintaining correct color presentation.
See "Adjusting Brilliant Color" on page 38
See "Selecting a Color Temperature" on page 39
See "Setting a preferred color temperature" on page 39
See "3D Color Management" on page 39
See "Resetting current or all picture modes" on page 40
See "Switching input signal" on page 34
See "Changing Color Space" on page 34
for details.
"Setting the User 1/User 2 mode" on
"Adjusting Brightness" on
for details.
for details.
for details.
for details.
for details.
for details.
"Selecting a
for details.
"Adjusting
"Adjusting
for details.
for details.
for details.
53