Controls And Functions - BenQ MH684 User Manual

Controls and functions

Projector
1
2
3
4
5
6
1. FOCUS/ZOOM Ring
Used to adjust the projected image
appearance. See
size and clarity" on page 27
2. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings. See
the menus" on page 30
3. MODE/ENTER
Selects an available picture setup mode.
See "Selecting a picture mode" on page 37
for details.
Enacts the selected On-Screen Display
(OSD) menu item. See
on page 30 for details.
4. POWER
Toggles the projector between standby
mode and on.
See "Starting up the projector" on page 26
and "Shutting down the projector" on page
46 for details.
5. ◄ Left/ Decrease volume level
Decreases volume. See
sound level" on page 44
6. ECO BLANK
Used to hide the screen picture. See
the image" on page 42
Introduction
7 8
"Fine-tuning the image
for details.
"Using
for details.
"Using the menus"
"Adjusting the
for details.
"Hiding
for details.
7. POWER indicator light
Lights up or flashes when the projector is
under operation. See
page 65 for details.
9
8. Keystone/Arrow keys (
10
Manually corrects distorted images
11
resulting from an angled projection. See
12
"Correcting 2D Keystone" on page 28
13
details.
14
9. TEMPerature indicator light
Lights up red if the projector's
temperature becomes too high. See
"Indicators" on page 65
10. LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem. See
details.
11. AUTO
Automatically determines the best
picture timings for the displayed image.
See "Auto-adjusting the image" on page
27 for details.
12. ► Right/
Increases volume. See
sound level" on page 44
When the On-Screen Display (OSD)
menu is activated, the #5, #8, #12, and
#14 keys are used as directional arrows
to select the desired menu items and to
make adjustments. See
on page 30
13. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 34
details.
14. Keystone/Arrow keys (
Manually corrects distorted images
resulting from an angled projection. See
"Correcting 2D Keystone" on page 28
details.
"Indicators" on
/▲ Up)
for details.
"Indicators" on page 65
Increase volume level
"Adjusting the
for details.
"Using the menus"
for details.
/▼ Down)
for
for
for
for
11