Auto Clock; Register Additional Handsets; Unregister The Handsets; Restore Default Settings - Philips M665 Extended User Documentation

Auto clock

Note
•
This service is network dependent.
•
Make sure you have subscribed to the caller ID service
before you use this feature.
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. For the date to
be synchronized, make sure the current year is
set.
1
Press MENU/OK.
2
Select [Services] > [Auto clock], then
press MENU/OK to confirm.
3
Select [On]/[Off] . Press MENU/OK.
» The setting is saved.

Register additional handsets

You can register additional handsets to the base
station. The base station can register up to 4
handsets.
1
Press MENU/OK on the handset.
2
Select [Services] > [Register], then press
MENU/OK to confirm.
3
Press and hold
5 seconds.
4
Enter the system PIN. Press REDIAL/C to
make corrections. Then press MENU/OK
to confirm the PIN.
» Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
•
If the PIN is incorrect or no base is found within a
certain period, your handset displays a notification
message. Repeat the above procedure if registration
fails.
•
The preset PIN is 0000. No change can be made on it.
on the base station for

Unregister the handsets

1
Press MENU/OK.
2
Select [Services] > [Unregister], then
press MENU/OK to confirm.
3
Enter the system PIN. (The preset PIN is
0000). Press REDIAL/C to remove the
number.
4
Select the handset number to be
unregistered.
5
Press MENU/OK to confirm.
» The handset is unregistered.
Tip
•
The handset number is displayed beside the handset
name in standby mode.

Restore default settings

You can reset your phone settings to the
original factory settings.
1
Press MENU/OK.
2
Select [Services] > [Reset], then press
MENU/OK to confirm.
» A confirmation request is displayed on
the handset.
3
Press MENU/OK to confirm.
» All settings (except the phonebook
and direct access keys information) are
reset.
EN 33