Auto Prefix; Select The Recall Duration; Dial Mode - Philips M665 Extended User Documentation

Auto prefix

This feature checks and formats your outgoing
call number before it is dialed out. The prefix
number can replace the detect number you
set in the menu. For example, you set 604 as
the detect number and 1250 as the prefix.
When you have dialed out a number such as
6043338888, your phone changes the number
to 12503338888 when it dials out.
Note
•
The maximum length of a detect number is 10 digits.
The maximum length of an auto prefix number is 10
digits.
•
This is a country dependent feature.
Set auto prefix
1
Press MENU/OK.
2
Select [Services] > [Auto prefix], then
press MENU/OK to confirm.
3
Enter the detect number, then press
MENU/OK to confirm.
4
Enter the prefix number, then press
MENU/OK to confirm.
» The setting is saved.
Note
•
To enter a pause, press and hold
•
If the prefix number is set and the detect number is left
empty, the prefix number is added to all outgoing calls.
•
The feature is unavailable if the dialed number starts
with * and #.

Select the recall duration

Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
32 EN
.
duration. You can select among 3 options:
[Short], [Medium] and [Long]. The number of
available options varies with different countries.
For details, consult your service provider.
1
Press MENU/OK.
2
Select [Services] > [Recall time], then
press MENU/OK to confirm.
3
Select an option, then press MENU/OK to
confirm.
» The setting is saved.

Dial mode

Note
•
This feature only applies to models that support both
tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
Set the dial mode
1
Press MENU/OK.
2
Select [Services] > [Dial mode], then
press MENU/OK to confirm.
3
Select a dial mode, then press MENU/OK
to confirm.
» The setting is saved.
Note
•
If your phone is in pulse dial mode, press
call for temporary tone mode. Digits entered for this
call are then sent out as tone signals.
during a