Installation Of Filters; Test Running; Prepare Remote Controller - LG AMNW18GDCR0 Installation Manual

Installation of filters
1
Pull out the [Allergy free filter + Triple Fil-
ter] from the separately packed plastic bag.
2
Detach the two nitto tapes from the filter.
3
Insert the filter into the filter case.
4
Detach two nitto tapes from the plasma fil-
ter.
Allergy Free Filter +
Triple Filter (Optional)
* The feature can be changed according a
type of model.

Test Running

- Check that all tubing and wiring are properly
connected.
- Check that the gas and liquid side service
valves are fully open.

Prepare remote controller

1
2
3
Plasma Filter
Remove the battery cover by pulling it ac-
cording to the arrow direction.
Insert new batteries making sure that the
(+) and (–) of battery are installed correctly.
Reattach the cover by pushing it back into
position.
!
NOTE
• Use 2 AAA(1.5volt) batteries. Do not use
rechargeable batteries.
• Remove the batteries from the remote
controller if the system is not used for a
long time
INSTALLATION
15