Advertisement
Recording
Built-in
microphone
Release
HOLD
before
operation
∫ Recording through the external microphone
The built-in microphone switches off.
RR-QR153
Connect the included microphone to the [MIC] jack.
RR-QR150
Use a condenser microphone without a built-in power supply.
1
Plug type: 3.5 mm (
⁄
in.) monaural
8
Changing microphone sensitivity
0
50
100
Preventing unnecessary recording
(VAS: Voice activated system)
VAS detects silence and pauses recording automatically. It is especially effective
when microphone sensitivity is set to L.
1 While stopped, press and hold [ $ FOLDER/ % MENU] until
the display changes.
Do each of the following within 10 seconds
2 Press [ $ FOLDER/ % MENU] until "
3 Press [:,9] to select "On".
4 Press [ 1 ].
"
" and recording indicator flash while VAS is waiting for a sound to record.
To turn the function off:
∫
Select "OFF" in step 3.
≥Start from the beginning again if the display returns to the clock partway through.
≥Press [STOP] or [∫] to stop partway through.
Recording indicator
External microphone jack
[MIC (PLUG IN POWER)]
0
50
100
H
L
H (High): Relatively soft sounds are
recorded.
H
L
L (Low): Only relatively louder
sounds are recorded.
Use when recording close
to the mouth.
" appears.
4
Store files in 4 folders (A, B, C and D). Each folder holds up to 99 files.
1
Press [
$ FOLDER/ %
MENU] to select
the folder.
Each time you press the button:
)
)
)
A
B
C
D
^_____----------n
2
Press [
] to change the recording quality.
REC MODE
Each time you press the button:
)
)
HQ
SP
LP
^_____-----n
Recording quality
Available recording time
33 minutes
HQ (High quality)
SP (Standard play)
65 minutes
LP (Long play)
210 minutes
Use HQ or SP if the sound source is far away.
≥
You can also change the microphone sensitivity and VAS setting. (See below)
3
Press [REC] to start recording.
.
The recording indicator lights
Each time you press [ $ FOLDER/ % MENU]:
Recording time
Available recording time
≥Available recording time also
appears when the remaining
time becomes very short.
4
Press [STOP] (or [∫]) to stop recording.
Information for the file appears one after the other:
HQ
HQ
B
B
REC
REC
DATE
DATE
PM
M
D
Date
Time
Timer recording
Preparation: Select the folder and recording quality (Steps 1
and 2 above).
1 While stopped, press and hold [ $ FOLDER/ % MENU] until
the display changes.
Do each of the following within 10 seconds
2 Press [ $ FOLDER/ % MENU] until "RECF" appears.
3 Press [:,9] to select "On".
4 Press [ 1 ].
5 Set the times.
1 Press [
] to change the start time.
:,9
2 Press [
].
1
3 Press [
] to change the end time.
:,9
4 Press [
].
1
When finished, the display changes in the following order:
ON time # OFF time # Current number of files # Clock
"RECF" flashes during recording and goes out when finished. (The setting is also
canceled.)
To check the timer settings:
∫
1 While stopped, press and hold [ $ FOLDER/ % MENU] until the display changes.
2 Within 10 seconds, press [ $ FOLDER/ % MENU] until "RECF" appears.
To cancel the timer:
∫
Select "OFF" in step 3.
≥Start from the beginning again if the display returns to the clock partway through.
≥Press [STOP] or [∫] to stop partway through.
Recording level
0 ・ 50 ・ 100
HQ
,.
B
File number
Recording time
H
M
S
Available recording time
Remaining memory
0 ・ 50 ・ 100
HQ
HQ
B
B
H
M
S
Recording time
No. of files
5
HQ
B
HQ
B
0 ・ 50 ・ 100
HQ
B
H
M
S
0 ・ 50 ・ 100
HQ
B
PM
Clock
Advertisement
