Resume Function; Direct Navigator - Panasonic DVD-LV50 Operating Instructions Manual

Basic play

Resume function

[RAM] [DVD-V] [CD]
The position you stopped play at is recorded by
the unit when "1" flashes on the LCD.
While "1" is flashing, press [1] (Play) to start
play from where you stopped it.
([DVD-V] Chapter Preview, see right)
≥This only works if the disc's elapsed play time
is shown in the on-screen menu icons
( page 23).
≥It is cleared if you open the disc lid.
≥The unit saves the position even when you
switch the unit to standby except when playing
a play list ( page 15).
≥Press [∫] to clear the position.
Selecting programs to play—

DIRECT NAVIGATOR

[RAM]
Use the program list to find programs to play.
1
Press [TOP MENU].
DIRECT NAVIGATOR
No Date
1
12/23(SAT)
2
12/26(TUE)
3
1/12(FRI)
4
1/24(WED)
5
2/20(TUE)
14
[VCD]
TOP MENU
RETURN
1 3,4,2,1,
ENTER
CH On Contents
10 21:02
4 14:35
2 20:00
5 19:30
12 19:05
0 9 SELECT
SELECT
RETURN
NUMBER ENTER
Chapter Preview
The following message appears immediately
after you press [1] (Play).
Press PLAY to Preview Chapters
Press [1] (Play) while the message is displayed
and the beginning portions of each chapter up to
the current one are played. Full play resumes
from the point where you stopped play.
(This feature works only within a title.)
If you do not press [1] (Play), the message dis-
appears and play starts from where you stopped
it.
2
Use [3, 4] to select the
program.
The selected program plays in the back-
ground.
≥Move the cursor jockey [4] to show other
programs if there are more than five.
≥You can select programs with the
numbered buttons (remote control).
≥To enter a 2-digit number
≥e.g. 25: [S10]>[2]>[5].
3
Press [ENTER].
Play of the program that was playing in the
background continues.
To clear the program list
Press [TOP MENU].
(The unit returns to the condition it was in before
you called up the program list.)
To display information about a selected
program
Select the program and move the cursor jockey
[1]. (The background picture pauses.)
Use [2, 1] to show the other programs.
To return to the previous screen
Press [RETURN].
For your reference
≥Titles appear only if you have entered them.
≥You cannot change program and disc titles.
[DVD-V]