Section Cut From The Countertop; Mounting - Smeg Dolce Stil Novo PXL675LAU Manual

5.3 Section cut from the countertop

The following operation requires
building and/or carpentry work
and must therefore be carried out
by a competent tradesman.
Installation can be carried out on
various materials such as masonry,
metal, solid wood or plastic
laminated wood as long as they
are heat resistant (>90°C).
Create an opening with the dimensions
shown in the figure in the countertop of the
piece of furniture.
L (mm)
600 560 - 564
750 700 ÷ 704
1000 880 - 884
A (mm) B (mm)
min 200 min 460 min 750 40 - 60
16
X (mm) Y (mm)
482 - 486
482 - 486
482 - 486
C (mm) D (mm) E (mm)
min 50
Installation

5.4 Mounting

Over built-in oven unit
The clearance between the hob and the
kitchen furniture or other installed
appliances must be enough to ensure
sufficient ventilation and air discharge.
If installed above an oven, a space must be
left between the bottom of the hob and the
top of the appliance installed below.
opens on bottom and on rear
opens on bottom
If installed on top of an oven, the
latter must be equipped with a
cooling fan.