Whirlpool W10096986A Use And Care Manual page 8

3.
Select the desired cycle
Tumble
Damp
Press
Dry
40
TIMED
DRY
50
60
70
Heavy
Dry
OFF
WP_WEGD4900XW
Select the desired cycle for your load. See the Cycle Guide
for more information about each cycle.
ACCUDRY™/AUTOMATIC DRY Cycles
You can select a different dryness level, depending on your
load, by turning the knob to dryness level.
Selecting Very Dry, ENERGY PREFERRED, or Less Dry
automatically adjusts the dryness level at which the dryer will
shut off. Once a dry level is set, it cannot be changed without
stopping the cycle.
ACCUDRY™/AUTOMATIC DRY cycles give the best drying in
the shortest time. Drying time varies based on fabric type, load
size, and dryness setting.
NOTE: Very Dry removes more load moisture. ENERGY
PREFERRED is used for a starting point for ACCUDRY™
cycles. Choose ENERGY PREFERRED for optimal energy
savings. Less Dry removes less moisture and used for loads
you may want to put on a hanger to complete drying.
4.
Set cycle settings and options
TEMPERATURE
fabric
Select cycle settings and options by turning the knob to the
desired position.
NOTE: Not all options and settings are available with all cycles.
TEMPERATURE / Fabric
Turn the TEMPERATURE / Fabric knob to change the drying
temperature setting. See "Setting the Drying Temperature".
Wrinkle Shield™ feature (on some models)
Get up to 40 minutes of heat-free, periodic tumbling at the
n
end of a cycle. Turn the WRINKLE SHIELD™ knob to select
ON or OFF at any time before the cycle has ended.
8
20
Cool Down
ACCUDRY
OFF
sensor dryer
Jeans
Very Dry
ENERGY PREFERRED
Delicate
Less Dry
Cool Down
OFF
WRINKLE
SHIELD
WRINKLE SHIELD
5.
Select End of Cycle Signal
(if desired)
PUSH TO START
Turn the END OF CYCLE SIGNAL knob to select the
desired setting (On or Off). The End of Cycle Signal produces
an audible sound when the drying cycle is finished. Promptly
removing clothes at the end of the cycle reduces wrinkling.
NOTE: When the Wrinkle Shield™ setting is selected
and the End of Cycle Signal is on, the tone will sound every
5 minutes until the clothes are removed, or the Wrinkle
Shield™ setting ends.
6.
Press PUSH to START to
begin cycle
PUSH TO START
Push and hold the PUSH to START knob to begin the cycle.
Promptly remove garments after cycle has completed to reduce
wrinkling. Use the Wrinkle Shield™ feature to avoid wrinkling
when you are unable to remove a load from the dryer as soon
as it stops.