Pyrolytic Function (On Some Models Only) - Smeg Classic SFPA6301TV Manual

4.5 Pyrolytic function (on some
models only)
Pyrolytic cleaning is an automatic
high-temperature cleaning
procedure that causes dirt to
dissolve. Thanks to this process, it is
possible to clean the inside of the
oven very easily.
Improper use
Risk of injury
• When this function is in use, the surfaces
could reach temperatures that are
higher than usual.
• Keep children at a safe distance.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
• Switch off the burners or electric hot
plates if there is a hob installed above
the oven.
Preliminary operations
Before starting the Pyrolytic cycle:
• Clean the internal glass pane following
the usual cleaning instructions.
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
44
Cleaning and maintenance
• Completely remove all accessories from
inside the oven.
• For very stubborn encrustations spray an
oven cleaning product onto the glass
(read the warnings on the product);
leave for 60 minutes, then rinse and dry
the glass using kitchen roll or a microfibre
cloth.
• Remove the temperature probe (if
present).
• Remove the rack/tray support frames.
• Close the door.
Pyrolytic function setting
1. Turn the Function knob
following appears on the display.
2. Press the Select knob
that you wish to use the Special functions.
The Defrost function screen appears on the
display.
until the
to confirm