Table of Contents
Advertisement
Quick Links
DEMOLITION HAMMER D25960, D25961
Congratulations!
You have chosen a D
WALT power tool. Years of experience, thorough product development and innovation
E
make D
WALT one of the most reliable partners for professional power tool users.
E
Technical Data
Voltage
U.K. & Ireland only
Type
Frequency
Power input
Impact rate
Impact energy (EPTA 05/2009)
Tool holder
Chisel positions
Weight
L
(sound pressure)
PA
K
(sound pressure uncertainty)
PA
L
(sound power)
WA
K
(sound pressure uncertainty)
WA
Vibration total values (triax vector sum) determined according to EN 60745:
Chiselling
Vibration emission value a
h,Cheq
hand position:
one handle on main handle
and one hand on side handle =
both hands on main handle =
Uncertainty K =
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
D25960
V
230
V
230/115
1
Hz
50
W
1600
min
-1
1450
J
35
28 mm Hex
1
kg
18.4
dB(A)
91
dB(A)
3.0
dB(A)
102
dB(A)
3.0
m/s²
6.8
m/s²
4.5
m/s²
1.5
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
Fuses:
Europe
U.K. & Ireland
EN GL IS H
D25961
230
230/115
1
50
1600
1450
35
30 mm Hex
1
16.9
91
3.0
102
3.0
6.8
4.5
1.5
230 V tools
10 Amperes, mains
230 V tools
13 Amperes, in plugs
23
Advertisement
Table of Contents
Related Manuals for DeWalt D25960K
Summary of Contents for DeWalt D25960K
- Page 1 EN GL IS H DEMOLITION HAMMER D25960, D25961 Congratulations! You have chosen a D WALT power tool. Years of experience, thorough product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data D25960 D25961 Voltage...
-
Page 2: Defi Nitions: Safety Guidelines
EN GLI SH Defi nitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently Horst Grossmann hazardous situation which, if not avoided, Vice President Engineering and Product will result in death or serious injury. - Page 3 EN GL IS H the power tool. Keep cord away from 4) POWER TOOL USE AND CARE heat, oil, sharp edges or moving parts. Do not force the power tool. Use the Damaged or entangled cords increase the correct power tool for your application. risk of electric shock.
-
Page 4: Residual Risks
EN GLI SH • Hold power tools by insulated gripping Markings on Tool surfaces when performing an operation The following pictograms are shown on the tool: where the cutting tool may contact hidden wiring or its own cord. Cutting accessory Read instruction manual Contacting a “live”... -
Page 5: Electrical Safety
EN GL IS H DO NOT let children come into contact with the ASSEMBLY AND ADJUSTMENT tool. Supervision is required when inexperienced WARNING: To reduce the risk of operators use this tool. injury, turn unit off and disconnect machine from power source before Active Vibration Control installing and removing accessories, The active vibration control neutralises rebound... -
Page 6: Operation
EN GLI SH 5. To remove a chisel pull back the retainer (d) and IMPORTANT: The tool must be held with two hands pull the chisel out of the tool holder (e). at all times when in use. Horizontal applications (fig. 2A): D25961 Proper hand position requires one hand on the side TO FIT A CHISEL WITH GROOVE IN THE SHANK (FIG. -
Page 7: Optional Accessories
EN GL IS H Optional Accessories WARNING: Ensure that the cutting edge does not show discolouration WARNING: Since accessories, other caused by too much pressure. This may than those offered by D WALT, have impair the hardness of the accessory. not been tested with this product, use For the best results only use sharp chisel bits. - Page 8 EN GLI SH GUARANTEE WALT is confident of the quality of its products and offers an outstanding guarantee for professional users of the product. This guarantee statement is in addition to and in no way prejudices your contractual rights as a professional user or your statutory rights as a private non-professional user.