Table of Contents
Advertisement
four feet are stable and resting
on the floor, adjusting them as
required, and check that the
appliance is perfectly to level
using a spirit level .
If the appliance is being
installed on wood or "floating"
floors (certain parquet and
laminate materials), secure a
60 x 60 x 3 cm (at least) sheet of
plywood to the floor then
place the appliance on top of
this .
Connect the water inlet
hose(s) to the water supply in
accordance with the
regulations of your local water
company .
For cold fill only models: do
not connect to the hot water
supply .
For models with hot fill: the
hot water inlet temperature
must not exceed 60 °C .
The washing machine is
fitted with transport bolts to
prevent any possible damage
to the interior during transport .
Before using the machine, it is
imperative that the transport
bolts are removed . After their
removal, cover the openings
with the 4 enclosed plastic
caps .
After installation of the
device, wait a few hours before
starting it so that it acclimates
to the environmental
conditions of the room .
Make sure that the
ventilation openings in the
base of your washing machine
(if available on your model) are
not obstructed by a carpet or
other material .
Use only new hoses to
connect the appliance to the
water supply . The old hose-sets
should not be reused .
The supply water pressure
must be in the 0 .1 - 1 Mpa
range .
6
ELECTRICAL WARNINGS
It must be possible to
disconnect the appliance from
the power supply by
unplugging it if plug is
accessible, or by a multi-pole
switch installed upstream of
the socket in accordance with
the wiring rules and the
appliance must be earthed in
conformity with national
electrical safety standards .
The appliance shall be
disconnected from its power
source during service and
when replacing parts .
Furthermore the removal of
the plug must be such that an
operator can check from any of
the points to which they have
access that the plug remains
removed .
Do not use extension leads,
multiple sockets or adapters .
The electrical components
must not be accessible to the
user after installation . Do not
use the appliance when you
are wet or barefoot . Do not
operate this appliance if it has a
damaged power cable or plug,
if it is not working properly, or
if it has been damaged or
dropped .
If the supply cord is
damaged, it must be replaced
with an identical one by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard - risk of
electric shock .
CLEANING AND
MAINTENANCE
WARNING: Ensure that the
appliance is switched off and
disconnected from the power
supply before performing any
maintenance operation; never
use steam cleaning
equipment - risk of electric
shock .
For the details of inspections
and maintenance required for
safe operation, please see the
Use and Care Guide .
DISPOSAL OF PACKAGING
MATERIALS
The packaging material is
100% recyclable and is marked
with the recycle symbol
The various parts of the
packaging must therefore be
disposed of responsibly and in
full compliance with local
authority regulations
governing waste disposal .
DISPOSAL OF HOUSEHOLD
APPLIANCES
This appliance is manufactured
with recyclable or reusable
materials . Dispose of it in
accordance with local waste
disposal regulations . For
further information on the
treatment, recovery and
recycling of household
electrical appliances, contact
your local authority, the
collection service for
household waste or the store
where you purchased the
appliance . This appliance is
marked in compliance with
European Directive 2012/19/
EU, Waste Electrical and
Electronic Equipment (WEEE) .
By ensuring this product is
disposed of correctly, you will
help prevent negative
consequences for the
environment and human
health .
The symbol on the product
or on the accompanying
documentation indicates that
it should not be treated as
domestic waste but must be
taken to an appropriate
collection center for the
recycling of electrical and
electronic equipment .
.
Advertisement
Table of Contents
