Figure 8. Installing the optical drive bracket
5. Connect the signal cable and the power cable to the new optical drive.
6. Reinstall the removed parts.
Pivot the drive bay assembly upward and downward
Prerequisite
Before you start, read Appendix A "Important safety information" on page 77 and print the following
instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 42.
2. Remove the front bezel. See "Front bezel" on page 43.
3. Pivot the drive bay assembly upward and downward.
.
Chapter 7
CRU replacement
47