Table of Contents
Advertisement
8. Adjustment procedure
1. Inch Setting
Adjustment point
1
Inch Setting
2. COMB-BIAS Adjustment
Adjustment point
1
COM-BIAS Adjustment
Adjustment conditions
Adjustment process mode
Adjustment process
"INCH SIZE" menu page 1/8
Adjustment conditions
A visual check
Adjustment process
"COM BIAS" menu page 8/8
Adjustment procedure
1) Inch Setting with adjustment process mode.
2) Enter the adjustment process mode, refering to the 2nd item.
3) By using P (
/
) key of R/C, Move the cursor to "INCH SIZE" on page 1/
8.
4) Select inch size 32/40/46 with the Volume (+)/(-) key of remote control.
5) Press the "OK" key of remote control.
6) After a while, If "*** OK ***" is displayed, the setting is completed.
Adjustment procedure
1) COM-BIAS Adjustment with adjustment process mode.
2) Enter to the adjustment process mode, refering to the 2nd item.
3) By using
/
key and P (
BIAS" on page 8/8.
4) Press the "OK" key. then, you can check that the pattern for adjustment is
displayed.
5) Adjust so that the flicker for the central part of a screen becomes the mini-
mum using the volume (+)/(-) key of R/C.
6) In order to exit from this process, press the "OK" key of remote control again.
4 – 5
LC-32/40/46LE600E/RU/S
/
) key of R/C, Move the cursor to "COM-
Advertisement
Table of Contents
