Table of Contents
Advertisement
Reset Button
The "Reset" button is used in rare cases when the Range Extender may function improperly.
Resetting the Range Extender will restore the Range Extender's normal operation while
maintaining the programmed settings. You can also restore the factory default settings by using
the "Reset" button. Use the restore option in instances where you may have forgotten your
custom password.
Resetting the Dual-Band Wi-Fi Range Extender
Push and release the "Reset" button. The light on the Range Extender will momentarily flash and
then become solid again, indicating that the reset is complete.
Restoring Your Range Extender to Factory Defaults
Press and hold the "Reset" button for at least 10 seconds, and then release it. The light on the
Range Extender will momentarily flash and then will begin to blink. When the light becomes solid
again, the restore is complete.
Technical Support
US
http://www.belkin.com/support
UK
http://www.belkin.com/uk/support
Australia
http://www.belkin.com/au/support
New Zealand
http://www.belkin.com/au/support
Singapore
1800 622 1130
Europe
http://www.belkin.com/uk/support
Advertisement
Table of Contents
