Belkin N300DB User Manual page 10

802.11e/WMM QoS
Security
This screen enables you to change the wireless security settings such as WPA or WEP.
We recommend leaving the settings you used when you went through the Setup Wizard.
By default, your Range Extender will use the same security settings as your main
network. However, if you wish, you may specify different security settings here. The
screen is arranged in two columns, one for your 2.4GHz network and the other for your
5GHz network.
Security Type: You may specify the type of security here. Available options are
WPA2/WPA, WEP, and None (no security). We recommend you use the same type of
security as your main router.
Password(Key):
Wireless Cards and 802.11g or 802.11b cards. If you
are in an environment that includes little to no 802.11g
or 802.11b wireless network traffic, you will achieve
the best wireless performance with protected mode
OFF. Conversely, in an environment with HEAVY
802.11g or 802.11b traffic or interference, you will
achieve the best wireless performance with protected
mode ON. This will ensure wireless performance is not
affected.
802.11e/WMM QoS is a feature that prioritizes the
traffic on your wireless network based on the type of
traffic. We recommend leaving this enabled for optimal
performance.