The Statistics Tab - Belkin F5D6050 User Manual

Shows the MAC address of the Wireless USB Network Adapter.
(g) Status
Displays the BSSID (in hexadecimal) of the access point with which the
Adapter
is associated. If you are connected to a network, the word "Associated"
followed
by a series of numbers (the MAC address of the access point) will be
displayed. If
the Adapter is scanning for a network, you will see the word "Scanning".
(h) Signal Strength
Displays the strength of the wireless signal from 0 to 100%. The closer
to 100%,
the better the signal strength is. The closer you are to a wireless router
or access
point, the stronger the signal should be.
USING THE BELKIN WIRELESS LAN MONITOR
UTILITY
13
(i) Link Quality
Displays the quality of the wireless signal from 0 to 100%. The closer to
100%,
the better the link quality is. Link quality differs from signal strength by
measuring the actual quality of the signal. It is possible to have low
signal
strength and high link quality.
(j) Activate Profile Manager Mode
See the section called "Using Profile Manager Mode".
(l) Exit Button
Click "Exit" to close the Wireless LAN Monitor Utility. To access the
utility again,
double-click on the " " icon in the bottom right corner of your screen.
USING THE BELKIN WIRELESS LAN MONITOR
UTILITY
14

The Statistics Tab

The "Statistics" tab shows you how much data has been sent and
received and if