Client Settings 21 - Vivotek PZ7112 User Manual

VIVOTEK
Client Settings
This chapter explains how to select the stream transmission mode and saving options on the
local computer. When finished with the settings on this page, click Save on the bottom of the
page to enable the settings�
MPEG-4 Media Options
Select whether to stream video or audio data or both� This is enabled only when the video mode is set to
MPEG-4�
MPEG-4 Protocol Options
Depending on your network environment, there are four transmission modes for MPEG-4 streaming:
UDP unicast: This protocol allows for better real-time audio and video streams� However, network
packets may be lost due to network burst traffic and images may be broken. Activate the UDP connection
when occasions require time-sensitive responses and the video quality is less important� Note that each
unicast client connecting to the server takes up additional bandwidth and the Network Camera allows up
to ten simultaneous accesses�
UDP multicast: This protocol allows multicast-enabled routers to forward network packets to all clients
requesting streaming media� This helps to reduce the network transmission load of the Network Camera
while serving multiple clients at the same time� Note that to utilize this feature, the Network Camera must
be configured to enable multicast streaming at the same time� For more information, please refer to
RTSP Streaming on page 41�
TCP: This protocol guarantees the complete delivery of streaming data and thus provides better video
quality� However, the real-time effect is not as good as that of the UDP protocol�
HTTP: This protocol allows for the same transmission quality as the TCP protocol without needing to
open specific ports for streaming under some network environments. Users inside a firewall can utilize
this protocol to allow streaming data through�
User's Manual - 21