Table of Contents
Advertisement
7.7 Rack heights
Set the racks at the right height.
Appliance height 32 inches with silverware basket
Level
1 max. ø
2 max. ø
3 max. ø
8 Before using for the
Before using for the first time
first time
Apply the settings for the first use.
Before using for the first time
8.1 Initial use
Before the first use, or after a fac-
tory reset, you will need to config-
ure the settings.
Tip: Connect your appliance to a
mobile device. You can conve-
niently change all settings using
the Home Connect™ app.
→ "Home Connect™ quick start",
Page 32
Requirement: The appliance has
been installed and connected.
Add special salt.
1.
Add rinse aid. → Page 21
2.
Switch on the appliance.
3.
→ Page 28
Set the water softening system.
4.
→ Page 20
Set the amount of rinse aid.
5.
→ Page 22
9.1 Overview of water hardness settings
You can find an overview of the water hardness values that can be se-
lected here.
You can find out how hard your water is from your local water company
or by using a water hardness tester.
Before using for the first time en-us
Upper rack
8.5"
9.5"
10.5"
6.
7.
Tip: You can change these set-
tings and other Basic settings
→ Page 30 at any time.
9 Water softening
Water softening system
Hard water leaves limescale on
Water softening system
dishware as well as the washing
tank, and parts of the appliance
may become blocked.
To ensure good dishwashing re-
sults, you can treat the water with
special salt and the water soften-
ing system. To avoid damage to
the appliance, water with a hard-
ness above 9 °E must be soft-
ened.
Lower rack
12"
11"
10"
Add detergent.
Start the Program with the
highest cleaning temperature
without dishware.
To remove any marks from wa-
ter or other residues, we rec-
ommend you operate the appli-
ance without dishware before
using it for the first time.
system
19
Advertisement
Table of Contents
