Table of Contents
Advertisement
S
Z
electing A
Select the desired zone using
contains a group of channels.
Select the desired channel/group ID using the Selector knob
(default). Each channel/group ID is programmed with settings
for transmitting and receiving.
•
You can toggle the display between the zone and channel/group
ID names and number by pressing the key programmed as Display
Format, or by accessing the Menu {page 2}.
Note: If the default settings for
have been changed, use the appropriate keys to select the zone
and channel/group ID.
t
rAnSmitting
1 Select the desired zone and channel/group ID.
2 Press the key programmed as Monitor or Squelch Off to
check whether or not the channel is free.
•
If the channel is busy, wait until it becomes free.
3 Press the PTT switch and speak into the microphone.
Release the PTT switch to receive.
•
For best sound quality, hold the transceiver approximately
. inches (3 ~ 4 cm) from your mouth.
■ Making Group Calls (Digital)
If a key has been programmed with Group or Group +
Status, you can select a group ID from the list to make a
call to those parties. To select a group ID:
1 Press the key programmed as Group or Group + Status.
2 Press
3 Press and hold the PTT switch to make the call.
•
Speak into the transceiver as you would during a normal
transmission.
0
c
one And
hAnnel
/
to select a group ID/name from the list.
/g
id
roup
/
(default). Each zone
/
and the Selector knob
Advertisement
Table of Contents
