Sony VPL-VW995ES Operating Instructions Manual page 7

1
After connecting the AC power cord to the unit, plug
the AC power cord into a wall outlet.
The ON/STANDBY indicator lights in red and the
unit goes into standby mode.
2
Press the ?/1 (On/Standby) button to turn on the unit.
The ON/STANDBY indicator flashes in green, and
then lights in green.
3
Adjust the focus.
Press the LENS ADJUSTMENT (FOCUS) button to
display the Lens Focus adjustment window (test
pattern). Then adjust the focus of the picture by
pressing the M/m/</, button.
Tips
• When "Lens Control" is set to "Off" on the Installation
you cannot adjust the focus, the picture size or the proper position
by pressing the FOCUS, ZOOM or SHIFT button (page 29).
• When "Test Pattern" is set to "Off" on the Function
test pattern is not displayed (page 27).
Note
Adjust the lens by using buttons on the remote control or the control
panel of the unit. Never make adjustments by directly turning the
lens with your hands, which may cause damage or malfunction to the
unit.
4
Lights in red.
Flashes in green for
tens of seconds and
then lights in green.
5
menu,
Tip
Whenever you press the
menu, the
When adjusting the picture position, do not touch the lens unit,
otherwise your fingers may be pinched by the moving parts.
7
Adjust the picture size.
Press the LENS ADJUSTMENT (ZOOM) button to
display the Lens Zoom adjustment window (test
pattern). Then adjust the size of the picture by
pressing the M/m/</, button.
To make the picture larger, press M/,.
To make the picture smaller, press m/<.
Adjust the picture position.
Press the LENS ADJUSTMENT (SHIFT) button to
display the Lens Shift adjustment window (test
pattern). Then adjust to the proper position of the
picture by pressing the M/m/</, button.
button, the test pattern disappears.
Note