Wall Mounting (Optional) - ViewSonic VX924 User Manual

Wall Mounting (Optional)

To obtain a wall-mounting kit, contact ViewSonic
instructions that come with the base mounting kit. To convert your LCD display from a desk-
mounted to a wall-mounted display, do the following:
1. Verify that the Power button is turned OFF, then disconnect the power cord.
2. Lay the LCD display face down on a towel or blanket.
3. Remove the rear panel covers from the back of the LCD display.
4. Remove the four screws attaching the base.
5. Remove the Rubber Plugs from inside the four VESA screw holes.
6. Attach the mounting bracket from the VESA compatible wall mounting kit (100 mm x 100
mm distance).
7. Attach the LCD display to the wall, following the instructions in the wall-mounting kit.
Rear panel
covers
ViewSonic VX924
or your local dealer. Refer to the
®
Four base screws
Four VESA
screw holes
6