Advertisement
23528_8820-00380_F7D4302 v1_Play Router_Updated_0222-2010
You can share a USB hard drive or flash drive to your network via
your Router's USB port. Once connected, you can share files and
music with other computers and devices within your network.
Plug your USB hard drive into the USB port on the back of your
Router. When the light above the USB port is lit, your drive is
available to computers on your network.
You can manually check the status of your shared drive by
visiting the USB Print and Storage Manager, found under the
Belkin Router Manager icon displayed in your system tray
(Windows) or menu bar (Mac). If you have difficulty sharing a
drive on your network, please see the "Troubleshooting"
section of this manual.
Adding a Printer
You can add a printer to your network via your Router's USB port.
Once connected, you can print from various computers and
wireless devices within your network.
Plug your printer's USB cable into the USB port located on the back
of your Router. When the light above the USB port is lit, your
printer is available to computers on your network.
You can manually check the status of your printer by visiting the
USB Print and Storage Manager, found under the Belkin Router
Manager icon displayed in your system tray (Windows) or menu
bar (Mac). If you have difficulty sharing a printer on your network,
please see the "Troubleshooting" section of this manual.
Note: Each computer that will use the printer must have both the
Belkin software and the printer's driver installed. If the print
driver is not installed, you will be asked to install it by the Belkin
USB Print and Storage Manager.
Adding Other USB Devices
Other USB devices may also be shared via your Router. Plug your
device into the USB port located on the back of your Router. When
Advertisement
