Sharp SH9010C User Manual page 82

Stopwatch (M 3-d-1)
You can store 4 lap times when using the stopwatch function.
→
"Organiser" "Tools 2" tab
1. Press [Start].
Press [LAP] to view the lap time before the stopwatch stops.
Last 4 lap times are saved.
2. Press [Stop].
Resetting Time
1. After stopping the stopwatch, press [Options] and select
"Reset".
Countdown Timer (M 3-d-2)
→
"Organiser" "Tools 2" tab
1. Enter the time to count.
You can set the time from 1 second to 60 minutes.
2. Press [Start].
Press [Suspend] to pause the countdown.
Press [Resume] to continue counting.
3. When the countdown has finished, press [Stop] and then
press [Start] to start the countdown again.
Editing the Countdown Time
1. In the countdown start screen, press [Options] and select
"Edit".
2. Modify the desired time.
→
"Stopwatch"
→
"Countdown Timer"
World Clock (M 3-d-3)
Setting the Time Zone
→
"Organiser" "Tools 2" tab
1. Press [Edit] and select "Set Time Zone".
The current time zone is indicated by red line on the world map.
2. Press c or d to change the time zone.
3. Press B.
To Set the Custom Time Zone
→
"Organiser" "Tools 2" tab
1. Press [Edit] and select "Set Time Zone".
2. Press [Original].
3. Enter the desired city name and time difference.
Setting Daylight Saving
→
"Organiser" "Tools 2" tab
1. Press [Edit] and select "Daylight Saving".
2. Select "On" or "Off".
→
"World Clock"
→
"World Clock"
→
"World Clock"
Organiser 81