Table of Contents
Advertisement
Selecting the Shutter Sound
→
→
"Camera"
[Options]
1. Select the desired shutter sound from 3 preset patterns.
To play back the shutter sound, press [Play] in step 1.
Note
• Continuous Shoot uses the specialised shutter sound that cannot
be changed using the above settings.
• The shutter sound remains active even when "General Volume"
(p. 91) is set to "Silent" to prevent unauthorised use.
Functions in Video Camera Mode
Selecting the Recording Time and Picture Size
→
→
"Camera"
[Options]
1. Select "For Message", "Extended Video" or "SD VIDEO".
For Message ( ):
Extended Video ( ):
SD VIDEO ( ):
2. Select the desired picture size.
If "For Message" is selected, select "QCIF(176×144)" or
"SubQCIF(128×96)".
If "Extended Video" is selected, select "VGA(640×480)",
"Wide(400×240)", "QVGA(320×240)", "HQVGA(240×176)",
"QCIF(176×144)" or "SubQCIF(128×96)".
50
Camera
→
"Settings"
"Shutter Sound"
"Record Time"
Limits the size to send a message
depending on service providers.
Less than 30 minutes (depending on
the memory).
Records in SD VIDEO format.
If "SD VIDEO" is selected, select "VGA(640×480)" or
"QVGA(320×240)".
Note
• If you select "For Message" for the recording time, the file size is
limited depending on the service provider. Therefore, the quality
is also limited for the setting.
• "Save and Send" is not displayed after recording in the Extended
Video mode.
Recording Video Clips with Sound
To record a video clip with sound, the microphone needs to be
activated.
→
→
"Camera"
[Options]
1. Select "On" or "Off".
Note
• The microphone is already turned on in the default setting. Select
"Off" to record a video clip without the sound.
• The file size of a video clip can be reduced if the sound is not
recorded.
Video Encoding
→
→
"Camera"
[Options]
1. Select the appropriate format.
"Microphone"
→
"Settings"
"Video Encode"
Advertisement
Table of Contents
