Events - Axis Q3505-V Mk II User Manual

AXIS Q35 Series
Setup
3. Enter the IP address of the host server.
4. Enter the name of the shared location on the host server.
5. Move the switch if the share requires a login, and enter username and password.
6. Click Connect.
How to add audio to your recording
Edit the stream profile which is used for the recording:
1. Go to Settings > System > Stream profiles.
2. Select the stream profile and click Modify.
3. In the Audio tab, select the Audio stream checkbox and select On from the drop-down list.
4. Click Ok.
How to record and watch video
To record video you must first set up network storage, see How to set up network storage on page 15, or have an SD card installed.
1. Go to the camera's live view.
2. Click on Record once to start recording and one more time to stop recording.
To watch your recording:
1. Click on Storage > Go to recordings.
2. Select your recording in the list and it will play automatically.

Events

About events
The event pages allow you to configure your product to perform actions when different events occur. For example, the product
can start a recording or send an email notification when motion is detected. The set of conditions that defines how and when
the action is triggered is called an action rule.
How to record video when the camera detects motion
This example explains how to set up the camera to start recording to the SD card five seconds before it detects motion and to
stop one minute after.
Make sure the AXIS Video Motion Detection application is running:
1. Go to Settings > Apps > AXIS Video Motion Detection.
2. Start the application if it is not already running.
3. Make sure you have set up the application according to your needs.
Create an action rule:
4. Go to Settings > System > Events and add an action rule.
5. Type a name for the action rule.
6. From the list of triggers, select Applications and then select AXIS Video Motion Detection (VMD).
16