Panasonic LUMIX DMC-GX85 Operating Instructions For Advanced Features page 45

2. Getting Started/Basic Operations
Temporarily changing the items assigned to the front/rear dials ([Dial Operation
Switch])
You can temporarily change the items assigned to the front/rear dials using the function
button to which [Dial Operation Switch] is assigned.
•
You can set the items to be assigned temporarily to the front/rear dials in [Dial Operation Switch
Setup] in [Dial Set.] in the [Custom] menu.
1
Set a function button to [Dial Operation Switch].
•
The following step is an example in which [Dial Operation Switch] is assigned to [Fn1].
2
Press [Fn1].
•
A guide will be displayed showing the items temporarily
assigned to the front/rear dials.
•
If no operations are performed, the guide will disappear in
a few seconds.
3
Rotate the front/rear dials while the guide is
displayed.
•
The settings of the items assigned to the dials will change.
4
Press [MENU/SET] and set.
•
You can also complete this step by performing either of the operations below:
–
Press the shutter button halfway
–
Press the rear dial
–
Press [Fn1]
•
Items that are temporarily assigned to the front/rear dials can be used only while the guide
2
(step ) or setting screen (step
(P46)
3
) is displayed.
45
(P58)
WB WB WB WB WB WB WB WB WB WB WB
AWB AWB
WB WB WB WB
ISO ISO ISO ISO
0
98 98 98
ISO ISO ISO ISO