Panasonic LUMIX DMC-GX85 Operating Instructions For Advanced Features page 330

12. Others
For care of the viewfinder/Eyecup
∫
•
As the eye cup cannot be removed, blow away the dust on the viewfinder surface with a blower
(commercially available), gently wipe it with a dry and soft cloth, and be careful not to remove it.
•
If you wipe the eye cup too hard and it is removed, consult the dealer or Panasonic.
About the Monitor/Viewfinder
•
Do not press the monitor with excessive force. Uneven colours may appear on the monitor and
it may malfunction.
•
If the camera is cold when you turn it on, the picture on the Monitor/Viewfinder will be slightly
darker than usual at first. However, the picture will return to normal brightness when the internal
temperature of the camera increases.
Extremely high precision technology is employed to produce the Monitor/
Viewfinder screen. However there may be some dark or bright spots (red, blue or
green) on the screen. This is not a malfunction. Though the Monitor/Viewfinder
screen parts are produced with highly controlled precision technology, some
pixels may be inactive or always lit. The spots will not be recorded on pictures
on a card.
About the Lens
•
Do not press the lens with excessive force.
•
Do not leave the camera with the lens facing the sun as rays of light from the sun may cause it
to malfunction. Also, be careful when placing the camera outside or near a window.
•
When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the picture may
be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking
pictures.
•
Do not place the lens mount facing downwards. Do not allow the lens
mount contacts A to become dirty.
330