DeWalt DXH2000 Instruction Manual page 4

NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!
WHEEL KIT ASSEMBLY
CONTENTS
REF# ITEM# ITEM DESCRIPTION
1 40857 Handle Assembly
2 21875 Carriage Assembly
3 21897 Axle Assembly
4 40859 Wheels Assembly
5 41076 Base Plate
6 28787 Hardware Kit
Screws, w/nuts
Wheel Spacer
Hardware Kit Hub Cap
Includes Large Washer
Cotter Pin
Base Plate Bolts
-Phillips Head Screw driver
Tools Needed
-Socket Wrench w/ 9/16 socket or wrench
After completely unpacking wheel kit, inspect for damaged or missing pieces.
If there are damaged or missing pieces please contact 1-800-805-5745
Step 1.
QTY
1
1
1
2
1
Remove bottom panel off heater and
1
reuse same screws to install the base
4
plate that is provided in the kit.
2
2
2
2
4
Set the heater on top of carriage lining the four threaded bolt
holes with the four holes on the carriage. Attach the heater to
the carriage by using the four bolts provided in hardware kit.
FOR ANY QUESTIONS:
Please call Toll Free 1-855-805-5745
Please include the model number, date of purchase and description of problem in all communications.
4
Install the axle and wheels to the carriage.
Step 3.
Step 2.
Step 4.
Attach the handle to the carriage using
the four nuts and bolts provided in the
hardware kit.