Table of Contents
Advertisement
You can set the blank time in the
the image automatically after a period of time when there is no action taken on the blank
screen.
Once Blank is pressed, the projector enters Eco mode automatically.
CAUTION
Do not block the projection lens from projecting as this could cause the blocking object to
become heated and deformed or even cause a fire.
Locking control keys
With the control keys on the projector locked, you can prevent your projector settings from
being changed accidentally (by children, for example). When the Panel Key Lock is on, no
control keys on the projector will operate except
1.
Press
(Panel Key Lock), or go to the
2.
Press Enter and press
3.
A confirmation message is displayed. Select Yes to confirm.
To release panel key lock, press and hold
You can also use the remote control to enter the
select Off.
Keys on the remote control are still functional when panel key lock is enabled.
If you press
Power to turn off the projector without disabling panel key lock, the projector
will still be in locked status the next time it is turned on.
Creating your own startup screen
In addition to selecting the projector preset startup screen from among Black, Blue, or
ViewSonic screen, you can make your own startup screen that is a picture projected from
your computer or video source.
To create your own startup screen:
1.
Project the picture you want to use as your startup screen from either a computer or
video source.
2.
Open the OSD menu and go to the BASIC > Screen Capture menu.
3.
Press Enter.
4.
A confirmation message displays. Press Enter again.
5.
The message 'Screen Capturing...' displays while the projector is processing the
picture. Please wait.
6.
If the action is successful, you see the message 'Captured Succeeded' on the screen.
The captured picture is saved as Screen Capture and have been set as your current
startup screen.
In the unlikely event that the capturing action fails, change your target picture. When it
happens, please set the resolution of the input signal under native resolution and try again.
Operating in a high altitude environment
We recommend you use the High Altitude Mode when your environment is between 1500
m–3000 m above sea level, and temperature is between 5°C–25°C.
CAUTION
BASIC > Blank Timer
Power.
SYSTEM > Panel Key Lock menu
.
/
to select On
on the projector for 3 seconds.
SYSTEM > Panel Key Lock
38
menu to let the projector return
menu and
Advertisement
Table of Contents
