Software Update - Samsung HW-JM25 User Manual

SOFTWARE UPDATE

Samsung may offer updates for the Soundbar's
system firmware in the future.
If an update is offered, you can update the firmware
by connecting a USB device with the firmware
update stored on it to the USB port on your
Soundbar.
Note that if there are multiple update files, you must
load them onto the USB device singly and use them
to update the firmware one file at a time.
Please visit samsung.com or contact the Samsung
call center to receive more information about
downloading updates files.
The product has a DUAL BOOT function.
●
If the firmware fails to update, you can
update the firmware again.
Insert a USB device containing the
●
firmware update into the USB port on the
main unit.
Updating firmware may not work properly
●
if audio files supported by the Soundbar
are stored in the USB storage device.
Do not disconnect the power or remove
●
the USB device while updates are being
applied. The main unit will turn off
automatically after completing the
firmware update.
After the update, all settings are reset to
●
their factory default settings. We
recommend you write down your settings
so that you can easily reset them after the
update.
If the firmware fails to update, we
recommend formatting the USB device in
FAT16 and trying again.
Once the software update is complete,
●
turn off the product and then press and
hold the ( p ) button on the remote
control for more than 5 seconds. The Red
LED will blink and the unit powers off.
The upgrade is complete.
Do not format the USB device in the NTFS
●
format. The Soundbar does not support
the NTFS file system.
Depending on the manufacturer, some
●
USB devices may not be supported.
21
FUNCTIONS