Table of Contents
Advertisement
FUNCTIONS
BLUETOOTH
You can connect a Bluetooth device to the Soundbar and enjoy music with high quality stereo sound, all
without wires!
▶ To connect the Soundbar to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
1. Press the (
) button on the main unit's top
panel or press the Bluetooth
remote control to display the
The
LED will blink indicating that the
●
Bluetooth device is not connected yet.
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. (Refer to the
Bluetooth device's user manual.)
3. Select the Stereo headset menu on the Bluetooth
device.
You will see a list of scanned devices.
●
4. Select "[Samsung] Soundbar J-Series" from the
list.
If the Bluetooth device is successfully
●
connected to the Soundbar, then the
will stop blinking.
If the Bluetooth device has failed to pair with
●
the Soundbar, delete the previous "[Samsung]
Soundbar J-Series" found by the Bluetooth
device and have it search for the Soundbar
again.
5. Play music on the connected device.
You can listen to the music playing on the
●
connected Bluetooth device over the
Soundbar.
In BT mode, the Play/Pause/Next/Prev
●
functions are not available. However, these
functions are available in Bluetooth devices
supporting AVRCP.
button on the
icon LED.
LED
16
Connect
Bluetooth device
If asked for a PIN code when connecting a
●
Bluetooth device, enter <0000>.
Only one Bluetooth device can be paired
●
at a time.
The Bluetooth connection will be terminated
●
when you turn the Soundbar off.
The Soundbar may not perform Bluetooth
●
search or connection correctly under the
following circumstances:
- If there is a strong electrical field around
the Soundbar.
- If several Bluetooth devices are
simultaneously paired with the Soundbar.
- If the Bluetooth device is turned off,
not in place, or malfunctions.
- Note that such devices as microwave
ovens, wireless LAN adaptors,
fluorescent lights, and gas stoves use
the same frequency range as the
Bluetooth device, which can cause
electric interference.
The Soundbar supports SBC data
●
(44.1kHz, 48kHz).
Connect only to a Bluetooth device that
●
supports the A2DP (AV) function.
You cannot connect the Soundbar to a
●
Bluetooth device that supports only the HF
(Hands Free) function.
Once paired, if the Soundbar is in D.IN,
●
AUX, or USB mode, selecting "[Samsung]
Soundbar J-Series" from the list on your
Bluetooth device will automatically change
the Soundbar's mode to BT.
Advertisement
Table of Contents
