Panorama Mode - Kodak PIXPRO X42 User Manual

Panorama Mode

With Panorama Mode, you can take a series of
pictures which will be stitched automatically into an
ultra-wide panoramic picture by the camera.
Follow the steps below:
1. Press button to select Panorama Mode (
2. Use the Left/Right buttons to specify the direction
of picture taking, and then in 2 seconds the
panoramic sequence will commence automatically.
3. Compose the first view of the panoramic picture
on the LCD screen and press the Shutter button to
capture the image.
F3.3 1/50
4. After the first shot is taken, the semi-transparent
image of the first shot will appear at the edge of
the screen. You can use this image to compose
your picture before you press the Shutter button to
capture and finish manual stitching.
).
Cancel Save
Cancel Save
5. If continuous pictures are less than 4 shots,
press the button and the camera will stitch the
pictures automatically. Press the playback button
to enter playback mode to see the effect.
6. If you take 4 pictures, the camera will automatically
stitch the pictures. Press the playback button to
enter playback mode to see the effect.
Flash Mode, Self-Timer, Macro Mode, and
Exposure Compensation are all disabled in
Panorama Mode.
In Montage mode, up to 4 photos can be
captured when the image size is set at 3MP.
25