Table of Contents
Advertisement
Panorama Mode
This feature allows you to capture a panoramic
view that will have significantly more content
than a single photograph. Follow the instruction
arrow with a smooth and steady movement of
the camera to seamlessly shoot an ultra-wide
scene of up to 360 degrees.
1. Press the [
] / [
[
] button to select a shooting direction.
(The right direction is used as default if you
do not make any choice), 2 seconds later,
the camera is ready to take pictures. You can
also press the
button or half press the
Shutter Button to be ready to take pictures.
2. Compose your shot on the LCD and press the
Shutter Button half way down to focus on the
subject. After focusing, continue to press the
Shutter Button all the way down to take the
first picture. At this time, the process dialog
of panorama mode stitching appears on the
screen.
3. Rotate the camera according to the set
direction. When the range of rotation does
not exceed the range that the camera
can detect, the progress dialog along the
indication arrow partially turns orange. When
it completely turns orange, panorama mode
shooting is finished.
] / [
]/
Cancel
In Panorama Mode, the Flash, Self-Timer, Macro
Modes and Exposure Compensation are not
available. Focus Adjustment is also not available
at this time.
During Panorama Mode shooting, when the
moving direction of the camera is wrong or
the angle deviates from the internal settings,
the LCD shows a warning message [Improper
alignment. Please try again.] and the current
pictures taken are saved.
During Panorama Mode shooting, press the
button to interrupt shooting and save the current
pictures. Press the [
shooting and delete previously taken pictures.
Panoramic images can be played back by the
method of flash playing. Refer to the "Animation
Panorama Playback" section on page 50.
Save
] button to cancel
27
Advertisement
Table of Contents
