Mf Assist - Panasonic LUMIX DMC-LX100 Operating Instructions For Advanced Features

MF Assist

■
Displaying the MF Assist
• Turn the control ring to display MF Assist.
• You can also display MF Assist by pressing
the cursor button to set the position to be enlarged, and then pressing [MENU/SET].
• When you perform the following operation, the position to be enlarged will be returned
to the centre.
– When you press the [DISP.] button on the screen used for setting of the position to
be enlarged
• If you press the cursor button when [Direct Focus Area] in the [Custom] menu is set to
[ON], the setting screen for the enlarged position appears.
■
Closing the MF Assist
• To exit MF Assist, press the shutter button halfway.
• You can also exit MF Assist by pressing [MENU/SET].
• When you display MF Assist by turning the control ring, MF Assist is automatically
ended approximately 10 seconds after you finish the operation.
Not available in the following case:
●
The MF Assist is disabled in the Digital Zoom range or when recording motion pictures.
Setting the display method of MF Assist
→ [Custom] → [MF Assist]
[ ]
Turn the control ring or press the [
[ ] Turn the control ring to enlarge the position.
[ ] Press the [
[OFF]
The control ring or [
131
Adjusting the focus and brightness (exposure)
] button ( ) to enlarge the position.
] button ( ) cannot be used to enlarge the position.
Taking pictures with Manual Focus
to display the setting screen, pressing
] button ( ) to enlarge the position.
SQW0038