Huawei AP4030DN Quick Start Manual page 8

AP4030DN Quick Start Guide
Table 1-2 Description of the indicator on the AP4030DN
Type
Default
status after
power-on
Software
startup
status
Running
status
Alarm
Issue 01 (2015-02-06)
Figure 1-2 Indicator on the AP4030DN
Color Status
Green Steady on
Green Steady on
after
blinking
once
Green Blinking
once every
2s (0.5
Hz)
Blinking
once every
5s (0.2
Hz)
Green Blinking
once every
0.25s (4
Hz)
华为专有和保密信息
版权所有 © 华为技术有限公司
Description
The AP is just powered on and the software is not
started yet.
After the system is reset and starts uploading the
software, the indicator blinks green once. Until the
software is uploaded and started, the indicator
remains steady green.
 The system is running properly, the Ethernet
connection is normal, and STAs are associated
with the AP.
 The system enters the Uboot CLI.
The system is running properly, the Ethernet
connection is normal, and no STA is associated
with the AP. The system is in low power
consumption state.

The software is being upgraded.
 After the software is uploaded and started, the
AP requests to go online on the AC and
maintains this state until it goes online
successfully on the AC (before the CAPWAP
link is established).

The AP fails to go online on the AC (the
Contents
8