Table of Contents
Advertisement
8
6) Plug one end of the long telephone
cord into the
TEL LINE
back of the base, then plug the
other end into a standard
telephone jack.
7) Line up the mounting slots on the base
with the mounting screws on the wall,
then push in and down until the
phone is firmly seated.
8) On the base unit, pull the handset
retainer out of the slot and rotate
it clockwise 180 degrees.
9) Flip the retainer from front to back,
then slide it into the slot so that the
lip of the retainer faces up and the
oval is at the bottom of the retainer.
This will hold the handset in place.
jack on the
Advertisement
Table of Contents
