Setting The Pulse/Tone Switch; Adjusting The Ringer Controls; Changing The Handset Ringer - Uniden EXS9110 Owner's Manual

TIP
Most phone systems use
tone dialing. Check with
your local phone company
if you're not sure whether
your system is
tone or pulse.
12

SETTING THE PULSE/TONE SWITCH

Be sure the
PULSE/TONE
the position unless your local
TONE
phone system uses pulse dialing.

ADJUSTING THE RINGER CONTROLS

Handset ringer volume
When the phone is either charging or in standby mode, pressing the
or key on the handset selects the handset ringer volume.
vol
There are two ringer volume settings; high and low.
Handset earpiece volume
There are four volume settings for the handset earpiece; high, normal,
medium, and low. The handset earpiece volume can only be adjusted
during a call. To lower the volume, press
press .
vol

CHANGING THE HANDSET RINGER

1. Press . LED flashes.
flash
2. Press , , or
1 2 3 4
switch is in
vol
on the keypad to select ringer tone.
. To raise the volume,