Table of Contents
Advertisement
8. Stabiliser, Zoom and Flash
Adjust the flash output
Applicable modes:
Adjust the flash brightness when pictures taken with the flash are over or underexposed.
1
Select the menu.
>
MENU
2
Press 2/1 to set the flash output and then press [MENU/SET].
•
You can adjust from [j3 EV] to [i3 EV] in steps of 1/3 EV.
•
Select [n0] to return to the original flash output.
•
[
i
] or [
j
] is displayed on the flash icon in the screen when the flash level is adjusted.
•
It can be set only when [Wireless] in [Flash] is set to [OFF] and [Firing Mode] is set to [TTL].
(P233,
239)
•
The [Flash Adjust.] setting also applies to an external flash. (excluding the wireless flash)
(P360)
Synchronising the output of the flash to the Exposure Compensation
Applicable modes:
The camera automatically optimises the flash output for the Exposure Compensation
value.
Select the menu.
(P63)
>
[Rec] > [Flash] > [Auto Exposure Comp.]
MENU
Settings: [ON]/[OFF]
•
For details on Exposure Compensation, refer to P173.
•
The [Auto Exposure Comp.] setting also applies to an external flash.
(P63)
[Rec] > [Flash] > [Flash Adjust.]
237
(P360)
Advertisement
Table of Contents
