ASROCK SBC-310 User Manual page 15

Backlight Power Select
(LCD_BLT_VCC)
(5-pin BKT_PWR1)
(see p.8 No. 9)
Backlight Control Level
(3-pin BLT_PWM1)
(see p.8 No. 8)
COM1 Pin9 PWR Setting Jumpers
(3-pin PWR_COM1)
(see p.8 No. 24)
(3-pin PWR_COM2)
(see p.8 No. 22)
(3-pin PWR_COM3)
(see p.8 No. 20)
(3-pin PWR_COM4)
(see p.8 No. 18)
mSATA Select
(3-pin MSATA_SEL1)
(see p.8 No. 3)
GPIO Default Setting
(3-pin JGPIO_SET1)
(see p.8 No. 25)
Use this to set up the backlight
power of the LVDS connector.
1-2: +5V
2-3: +12V
1
3-4: +12V
4-5: DC_IN Power
1-2: +3V
2-3: +5V
1-2: +5V
2-3: +12V
1-2: mini-PCIe
2-3: mSATA
1-2: Pull-High
2-3: Pull-Low
15