Location Of Control - LENCO SCD-6800 User Manual

LOCATION OF CONTROL
1) USB socket
2) Aux in socket
3) 3.5mm headphone jack
4) Cassette button
5) Handle
6) FM antenna
7) CD door open/close
8) LCD display
9) Function button
10) Stop /Enter button
11) Skip/Tuning down button
12) Menu/Mem/clock‐adjust button
13) Timer button
14) Volume up/down button
15) Cassette door
16) Standby LED
17) On/Off button
18) Play/pause /Scan button
19) Skip/tuning up button
20) Pre/Folder up button
21) Info/Play mode button
22) DC jack
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Important:
Since movement of the cd mechanism and the sensitive circuitry may cause interference to the radio tuner nearby, switch this
unit off while operating other radio devices.
Due to the complexity of MCU control, please un‐plug the main power supply of the unit if found the unit hang up
during operation!
This is not a malfunction of the system!
Precautions for use
Installation

Unpack all parts and remove protective material.

Do not connect the unit to the mains before checking the main voltage and before all other connections have been made.

Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
Connection
1. Connect the DC plug of the included AC/DC adaptor to DC jack (22) then the AC/DC adaptor connect to the AC outlet.
2. When you first plug the unit into the mains, the unit will go into standby mode. The Standby LED will light up
3. Turn on the unit by pressing "On/Standby" button (17). If the LCD display (8) is on with backlighting, it means the power
supply is normal. Now the system is ready to play the music.
Version: 1.0
6