Table of Contents
Advertisement
Wireless-G ADSL Gateway with 2 Phone Ports
7. Select the Tunnel Setting tab, and click The tunnel endpoint is specified by this IP Address radio button.
Then, enter the WAN IP Address.
8. Select the Connection Type tab, and click All network connections. Then, click the OK or Close button to
finish this rule.
Tunnel 2: Router->win
9. In the new policy's properties screen, make sure that "win -> Router" is selected and deselect the Use Add
Wizard check box. Then, click the Add button to create the second IP filter.
Appendix C: Configuring IPSec between a Windows 2000 or XP Computer and the Gateway
How to Establish a Secure IPSec Tunnel
Figure C-16: Tunnel Setting Tab
Figure C-17: Connection Type Tab
Figure C-18: Properties Screen
99
Advertisement
Table of Contents
