Linksys Instant Wireless Series User Manual page 11

case-sensitive and should not be longer than 16 alphanumeric characters. This pass phrase must
match the pass phrase of your other wireless network devices and is compatible with Linksys
wireless products only. (If you have any non-Linksys wireless products, enter the WEP key
manually on those products.)
Transmit Key - The default transmit key number is 1. If your network's access point or wireless
router uses transmit key number 2, 3, or 4, select the appropriate number from the Transmit Key
drop-down box.
Key 1-4 - If you are not using a Passphrase, then manually enter your WEP key(s). The WEP keys
you enter must match the WEP keys of your wireless network. If you are using 64-bit WEP
encryption, then each key must consist of exactly 10 hexadecimal characters. If you are using
128-bit WEP encryption, then each key must consist of exactly 26 hexadecimal characters. If you
are using 152-bit WEP encryption, then each key must consist of exactly 32 hexadecimal
characters. Valid hexadecimal characters are "0" to "9" and "A" to "F".
Click the Next button to continue, and then go to step 8. Click the Back button to return to the
previous screen.
WPA-RADIUS
WPA-RADIUS features WPA used in coordination with a RADIUS server. (This should only be
used when a RADIUS server is connected to the Router.) WPA RADIUS offers two encryption
types, TKIP and AES, with dynamic encryption keys, as well as two authentication methods,
EAP-TLS and EAP-PEAP.
After you select WPA-RADIUS and click the Next button, the TkIP Setting screen will appear.
Encryption Type - Select the type of algorithm your network is using, TKIP or AES.
Click the Next button to continue. Click the Back button to return to the previous screen.
The EAP settings screen will appear next. Select EAP-TLS or EAP-PEAP from the Authentication
Method drop-down menu. The options are described on the next page.
EAP-TLS
If you selected EAP-TLS, enter the login name of your wireless network in the Login Name field.
Enter the name of the server in the Server Name field. From the Certificate drop-down menu,
select the certificate you have installed to authenticate you on your wireless network.
Click the Next button to continue, and then go to step 8. Click the Back button to return to the
previous screen.
EAP-PEAP
If you selected EAP-PEAP, enter the login name of your wireless network in the Login Name field.
Enter the name of the server in the Server Name field. Enter the password of your wireless
network in the Password field.
Click the Next button to continue, and then go to step 8. Click the Back button to return to the
previous screen.
RADIUS
RADIUS features WEP used in coordination with a RADIUS server. (This should only be used
when a RADIUS server is connected to the Router.) If you selected RADIUS, the EAP setting
screen will appear. RADIUS offers two authentication types: EAP-TLS and EAP-PEAP.
Authentication Type - Select the authentication method your network is using, EAP-TLS or
EAP-PEAP. These options are described below.
EAP-TLS
If you selected EAP-TLS, enter the login name of your wireless network in the Login Name field.
Enter the name of the server in the Server Name field. From the Certificate drop-down menu,
select the certificate you have installed to authenticate you on your wireless network.
Click the Next button to continue, and then go to step 8. Click the Back button to return to the
previous screen.
EAP-PEAP
If you selected EAP-PEAP, enter the login name of your wireless network in the Login Name field.
Enter the name of the server in the Server Name field. Enter the password of your wireless
network in the Password field.
Click the Next button to continue, and then go to step 8. Click the Back button to return to the
previous screen.