Table of Contents
Advertisement
6.0 Unpacking
Open shipping container and check for shipping
damage. Report any damage immediately to your
distributor and shipping agent. Do not discard any
shipping material until the Lathe is assembled and
running properly.
Compare the contents of your container with the
following parts list to make sure all parts are intact.
Some parts can be found in separate boxes
packed around the Lathe. Missing parts, if any,
should be reported to your distributor. Read the
instruction
manual
thoroughly
maintenance and safety instructions.
Read and understand the entire contents of this manual before attempting set-up or
operation! Failure to comply may cause serious injury.
6.1 Contents of shipping container
1
2
1
1
1
1
1
1
1
1
1
for
assembly,
1
4
10 Socket Hd. Cap Screws, 3/8" x 1-1/4" – (O)
10 Lock Washers, 3/8" – (P)
8
1
1
7
Lathe Bed, with Headstock, Tailstock, & Tool
Support Base – (A)
Leg Assemblies – (B)
Guard – (C)
Tool Support, 14" – (D)
Face Plate, 3" – (E)
Live Center – (F)
Spur Center, 1" – (G)
Index Pin – (H)
Live Center Pin – (J)
Knockout Rod – (K)
Face Plate Wrench – (L)
Tool Caddy – (M)
Levelers – (N)
Flat Washers, 3/8" – (R)
Owner's Manual (not shown)
Product Registration Card (not shown)
Advertisement
Table of Contents
