Advertisement
B150M-PIO2
Step 3
The standoff is placed at the nut
location B by default. Skip Step 4 and
go straight to Step 5 if your M.2_SSD
A
B
(NGFF) module is type 2280. If your
M.2_SSD (NGFF) module is type
2260, go to Step 4.
Step 4
Peel off the yellow protective film on
the nut location A. Hand tighten the
standoff into the nut location A on
B
A
the motherboard.
Step 5
Align and gently insert the M.2
(NGFF) SSD module into the M.2
slot. Please be aware that the M.2
A
B
(NGFF) SSD module only fits in one
orientation.
B
A
Step 6
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw
as this might damage the module.
B
A
15
Advertisement
