Remove leakage prevention cap
• Remove the leakage prevention cap attached to the outdoor unit service valve before pipe
work.
• Proceed the leakage prevention cap removal as follows:
- Verify whether the liquid/gas pipes are locked.
- Extract remaining refrigerant or air inside using the service port.
- Remove the leakage prevention cap
Liquid pipe
Gas pipe
Pipe Drawing Out during Single / Series connection
Method of drawing out pipes on the front side
- Proceed with the pipe work as shown in the below figure for front side pipe drawing out.
PIPE CONNECTIONS BETWEEN INDOOR AND OUTDOOR UNIT
Service Port
Leakage Prevention Cap
Refrigerant Charging Port
Pipe Knock Out for
Liquid/Gas pipes
25