Related Manuals for LG LF62 Series
Summary of Contents for LG LF62 Series
- Page 1 LED TV LF62** www.lg.com (M4 X L14) (M4 X L20) 42LF62** 32LF62** 42/49/55LF62** P/No: MFL68703222 (1502-REV00) Printed in Korea...
- Page 3 32/42LF62** 49/55LF62**...
- Page 4 LF62*D, LF62*T, LF62*Y, LF62*Z ANTENNA/ CABLE IN OPTICAL DIGITAL AUDIO OUT AUDIO VIDEO (MONO) VIDEO VIDEO (MONO)
- Page 5 LF62*0, LF62*B ANTENNA/ CABLE IN OPTICAL DIGITAL AUDIO OUT VIDEO VIDEO AUDIO AUDIO VIDEO AUDIO MONO MONO...
- Page 7 32LF6200-TB 42LF6200-TB 49LF6200-TB 55LF6200-TB 32LF620B-TB 42LF620B-TB 49LF620B-TB 55LF620B-TB 32LF620D-TB 42LF620D-TB 49LF620D-TB 55LF620D-TB 32LF620T-TB 42LF620T-TB 49LF620T-TB 55LF620T-TB 32LF620Y-TB 42LF620Y-TB 49LF620Y-TB 55LF620Y-TB 32LF620Z-TB 42LF620Z-TB 49LF620Z-TB 55LF620Z-TB 731 x 477.6 x 184.6 959 x 609.7 x 193 1105 x 694.3 x 230 1241 x 769 x 230 (mm) 731 x 442 x 56.5 959 x 570 x 56.2...
- Page 9 OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com *MFL68761003* P/NO : MFL68761003 (1504-REV01) Printed in Korea...
-
Page 10: Safety Instructions
Safety instructions Please read these safety precautions carefully before using the product. Make sure to connect Mains cable to compliant AC mains socket with WARNING Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured. Do not place the TV and/or remote control in the following Insert power cable plug completely into wall socket otherwise if not environments:... - Page 11 Do not drop the product or let it fall over when connecting external Do not drop metallic objects such as coins, hair pins, chopsticks or wire devices. Otherwise, this may result in injury or damage to the product. into the product, or inflammable objects such as paper and matches. Children must pay particular attention.
- Page 12 Only use an authorized AC adapter and power cord approved by technician. If not installed by a qualified technician, this may create a LG Electronics. Otherwise, this may result in fire, electric shock, fire hazard or an electric shock hazard.
- Page 13 We recommend that you maintain a distance of at least 2 to 7 times Do not turn the product On/Off by plugging-in or unplugging the power the diagonal screen size when watching TV. If you watch TV for a long plug to the wall outlet.
- Page 14 Do not press strongly upon the panel with a hand or sharp object such When moving or unpacking the product, work in pairs because the as nail, pencil or pen, or make a scratch on it, as it may cause damage product is heavy.
-
Page 15: Viewing 3D Imaging (Only 3D Models)
Viewing 3D imaging (Only 3D models) WARNING You may find different brightness and color of the panel depending on Viewing Environment your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not • Viewing Time related with the product performance, and it is not malfunction. - Page 16 • If you do not use a certified HDMI cable, the screen may not display • Make sure to use LG 3D glasses. Otherwise, you may not be able to or a connection error may occur. (Recommended HDMI Cable Types) view 3D videos properly.
-
Page 17: Separate Purchase
AG-F*** AG-F***DP Cinema 3D glasses Dual play glasses LG Audio Device • Hold the top and bottom of the TV frame firmly. Make sure not to Maintenance hold the transparent part, speaker, or speaker grill area. Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. -
Page 18: Using The Joystick Button
Using the joystick button Adjusting the Menu When the TV is turned on, press the joystick button one time. You can adjust the Menu items moving the joystick button up, down, left or (Image shown may differ from your TV.) right. -
Page 19: Securing The Tv To A Wall
Securing the TV to a wall WARNING If a television is not positioned in a sufficiently stable location, it can (This feature is not available for all models.) be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • ... -
Page 20: Mounting On A Wall
LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. When you do not use LG’s wall mount CAUTION bracket, please use a wall mount bracket where the device is adequately • ... -
Page 21: Connections (Notifications)
Antenna connection • When attaching a wall mounting bracket to the TV, insert the wall mount spacers into the TV wall mount holes to adjust the vertical Connect the TV to a wall antenna socket with an RF cable (75 Ω). angle of the TV. -
Page 22: Ci Module Connection
4 K @ 50/60 Hz Support Format Colour Depth / Frame rate Chroma Sampling Resolution (Hz) 8 bit 10 bit 12 bit YCbCr 4:2:0 YCbCr 4:2:0 50.00 YCbCr 4:2:2 3840 x 2160p 59.94 4096 x 2160p YCbCr 4:4:4 60.00 RGB 4:4:4 1 : Only supported when HDMI ULTRA HD Deep Colour turned “On”. - Page 23 Licenses Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
-
Page 24: Open Source Software Notice
• The ISF function is only available on some models. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such... - Page 25 • Super Resolution : [Depending on model] To use Energy Saving feature Adjusts the resolution to make dim and blurred images clearer. SETTINGS PICTURE Energy Saving • Depending on input signal or other picture settings, the range of Reduces power consumption by adjusting screen brightness. detailed items for adjustment may differ.
- Page 26 Connect LG audio device with the logo to the optical digital High-speed HDMI® cables have the No. 13 pin connected for audio output port. LG audio device allows you to enjoy rich powerful information exchange between devices. sound easily. • If you switch to another input, the SIMPLINK device will stop.
- Page 27 To set password My Media supporting file SETTINGS LOCK Set Password • Maximum data transfer rate : 20 Mbps (Mega bit per second) • External supported subtitle formats : *.srt (SubRip), *.smi (SAMI), Sets or changes the TV password. *.sub (SubViewer, MicroDVD, DVDsubtitleSystem, SubIdx(Vobsub)), The initial password is set to ‘0000’...
-
Page 28: Supported Audio Formats
[Support] MPEG1, MPEG2, Layer2, Layer3 • File Type : AAC [Bit rate] Free Format [Sample freq.] 8 kHz ~ 48 kHz To obtain detailed User Guide information, please visit www.lg.com. [Support] ADIF, ADTS • File Type : M4A [Bit rate] Free Format External control device [Sample freq.] 8 kHz ~ 48 kHz... -
Page 29: Troubleshooting
Troubleshooting Cannot control the TV with the remote control. • Check the remote control sensor on the product and try again. • Check if there is any obstacle between the product and the remote control. • Check if the batteries are still working and properly installed ( to , to ). -
Page 30: Specifications
Specifications 32LF51** 43/49LF51** Manufacturer : Lien Chang Model : LCAP25B Manufacturer : Honor Manufacturer : Lien Chang Model : ADS-45EI-19 19040GPI, Model : LCAP40 AC/DC Adapter ADS-40LSI-19-2 19040G, Manufacturer : APD ADS-45SN-19-2 19040G Model : DA-65F-19 Manufacturer : APD Model : WA-40D19FI In : AC 100 - 240 V ~ 50/60 Hz In : AC 100 - 240 V ~ 50/60 Hz Out : DC 19 V... - Page 31 3D supported mode (Only 3D models) Video, which is input as below media contents is switched into the 3D screen automatically. The method for 3D digital broadcast may differ depending on the signal environment. If video is not switched automatically into 3D, manually convert the settings to view 3D images.
- Page 32 HDMI-DTV supported mode HDMI-PC supported mode Use HDMI IN 1 for PC mode (Except for UF67**) Vertical Horizontal Resolution Frequency Frequency (kHz) (Hz) Horizontal Vertical Resolution 31.46 59.94 Frequency (kHz) Frequency (Hz) 640 x 480 31.50 60.00 640 x 350 31.46 70.09 31.47...
- Page 33 (Only Jordan) WEEE Disposal of your appliance The symbol indicating separate collection for electrical and electronic equipment consists of the crossed-out wheeled bin.
- Page 34 19960 in Egypt 021 36 54 54 in Algeria Other countries, Please contact our local dealer or log into http://www.lg.com Record the model number and serial number (Only DTV) of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
-
Page 35: External Control Device Setup
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com... -
Page 36: Key Codes
KEY CODES kEy CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button... -
Page 37: Usb To Serial Converter With Usb Cable
(TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals. -
Page 38: Customer Computer
EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &... -
Page 39: Communication Parameters
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA... -
Page 40: Transmission / Receiving Protocol
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. - Page 41 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
- Page 42 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
- Page 43 EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
- Page 44 EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
- Page 45 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
- Page 46 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set Ack [u][ ][Set ID][ ][OK/NG][Data][x]...