Toshiba IK-WB16A User Manual page 21

Set up the Network Camera through Power over Ethernet (PoE) (IK-WB16A only)
When using a PoE-enabled switch
The Network Camera is PoE-compliant, which allows it to be powered via a single Ethernet
cable. If your switch/router supports PoE, refer to the following illustration to connect the
Network Camera to a PoE-enabled switch/router.
1 2 3 4
microSD
power + data transmission
PoE Switch
(Not supplied)
When using a non-PoE switch
If your switch/router does not support PoE, use a PoE power injector (not supplied) to connect
between the Network Camera and a non-PoE switch/router.
1 2 3 4
microSD
PoE Power Injector
(Not supplied)
Non-PoE Switch
(Not supplied)
21