Advertisement
Available languages
Available languages
Resume When
Power On
Software Update
Reset to Default
10. DLNA/UPnP
You may change the default DLNA name as you like. Theinformationbelow is the
introductionofhowtosetup media streaming from PC or other media server. Study the own
instruction of the software or apps you use to enjoy music streaming if necessary. Make sure the
music files are in the format of MP3, WHA, WAV or AAC for music streaming to the radio.
UPnP
Connect the PC to the network.
Ensure the Radio is powered on and connected to the same network.
Open the UPnP platform Windows Media Player (11 or later). Alternatively, other platforms or
serversuch as Windows Media Connection may be used.
Allow to share your media to Radio.
Add the audio files and folders you want to share with radio to the media library.
You may also enjoy the streaming music from other music server, such as smart phone (Android
platform)
Connect the mobile to the network
Search and install media sharing apps from Google Play.
Add the audio files from your mobile you want to share.
After setup the shared server, choose the music and control playback on the Radio.
DLNA
Besides UPnP, Radio supports DLNA function, you share the music files from PC or Android mobile,
and you use your PC, Android mobile or iPhone/iPad to control music playback on the Radio. (It is
not required to control each playback on the Radio.)
The PC system requirement for DLNA is Windows 7 and Windows Media Player 12. Setup as below:
First, share the media on your PC to Radio.
Control Panel > Network and Internet > Network and Sharing Center > Change Advanced Sharing >
Media streaming options
The system is default to resume internet radio playback if you were
listening to internet radio or media center before switch off the unit. If turn
this setting off, the system will remain in the main menu when switching on
the unit.
Update software. If there is an updated software version on the server, the
system will notify you. Before starting a software upgrade, ensure that the
unit is plugged into a stable mains power connection. Disconnecting power
during a software update may permanently damage the unit.
Restore the default settings. After the DIR-100 is reset, the system will
move to language is elected.
14
Advertisement
