Configurations; Neuron Id; Service Pin; Device Interface (Xif) File - Toshiba TOSVERT VF-FS1 Series Function Manual

3. Configurations

3.1. Neuron ID

L W device has the individual Neuron ID. The ID is indicated on the option unit as the barcode
ON ORKS
(EAN128). Products have 3 sticker labels where the Neuron ID is indicated.

3.2. Service pin

Service pin function causes the node to propagate the service message over the network so that the
network controller finds the node. There is Service pin as a mechanical switch on the L
unit (refer to an attached instruction manual in detail).

3.3. Device interface (XIF) file

Device interface (XIF) files are the files that define the network-visible interface for one or more
L W devices. The device interface is the interface to a device that is exposed over a L
ON ORKS
network. The device interface includes the device's self-documentation information, the number of
address table entries, the number of message tags, and the number, types, and directions of network
variables.
XIF files are distributed on our web site "www.inverter.co.jp".

3.4. LNS Plug-in

LNS Plug-in provides one or more means to monitor or alter configuration properties or network
variables. It may be used for device-specific configuration or monitoring.
The device plug-ins are also distributed on our web site "www.inverter.co.jp".

3.5. Inverter configurations

Set the inverter parameters according to the instruction manual attached with the product.
However, L W
ON ORKS
vl) so that they should not be edited.
Configuration by PC commissioning software (PCM001Z) is also available by using serial
communication option (USB001Z) through RS485 port.
N.B.: Refer to Section 2.3 for RS485 port specification in detail.
option unit will edit some of the inverter parameters (fh, ul, ll, acc, dec,
- 9 -
E6581373
W option
ON ORKS
W
ON ORKS